Mep segatrice PH 261-1/HB
Download PDF
Description
The PH 261-1, a manual band sawing machine for cuts from 0° to +60°, is also supplied in a version with an HB device for unmanned single cuts, while still maintaining the manual cutting cycle.
HB CUTTING CYCLE:
– After positioning the bar and closing the vice, the cutting phase starts, which uses the weight of the bow controlled by a hydraulic circuit to regulate the descent speed; once the cut has been made, the band stops, the bow is lifted manually up to the position required to advance the bar and locked by means of a manually controlled hydraulic valve.
SOME FEATURES:
– Sturdy cast-iron structure that allows belt tensioning up to 900 kg.
– Electrical cabinet with fully identifiable wiring, stand-by, main switch with padlockable device, protection against
short-circuits, motor protection circuit breaker, minimum voltage coil, 24 Volt low voltage system .
– IP55 control handle.
– Locked drive pulley with shrink disk for strong fixing while maintaining the possibility of axial adjustment.
– Blade-guide heads with 6 WIDIA plates for increased stability.
– Stop stops at 0° and +60° with lever for locking at any intermediate angle.
– Head joint with preloaded conical bearings.
– Vice with quick-clamping lever.
– Electric belt lubrication pump.
– Brush blade cleaning device.
– Bimetal belt for solids and profiles.
– Instruction manual for spare parts request.